// // Leave a Comment

LED Light Bulbs | Bonded Fin Heat Sink | Production By Liquid Metal Forging

LEDs won’t burn your hand like some light sources, but they do produce heat. All light sources convert electric power into radiant energy and heat in various proportions. LEDs generate little or no IR or UV, but convert only 20%-30% of the power into visible light; the remainder (70%) is converted to heat that must be conducted from the LED die to the underlying circuit board and heat sinks, housings, or luminaire frame elements.
01-Light Emitting Diodes - LED - high powered lighting

Term: Heat Sink:
Thermally conductive material attached to the printed circuit board on which the LED is mounted. Myriad heat sink designs are possible; often a “finned” design is used to increase the surface area available for heat transfer. For general illumination applications, heat sinks are often incorporated into the functional and aesthetic design of the luminaire, effectively using the luminaire chassis as a heat management device.
01-LED bulbs - LED flashlight - LED light bulbs
Why does thermal management matter?
Excess heat directly affects both short-term and long-term LED performance. The short term (reversible) effects are color shift and reduced light output while the long-term effect
is accelerated lumen depreciation and thus shortened useful life. If heat is allowed to build, it can damage parts causing them to dim and lose efficiency.
01-heat sink thermal resistance - heat sink material - LED lights - bonded fin heat sink
Manufacturing Methods:
In liquid metal forging , sometimes called squeeze casting process, molten metal is poured directly into the bottom die. Then the top die is forced down to forge the part as that in a conventional forging operation.
01- liquid forging - liquid metal forging - squeeze casting
The metal solidifies rapidly under considerable pressure in the range of 27.5 to 82.6 MPa depending on the work metal. With optimized process parameters, liquid metal forging parts have no internal porosity and a fine cast structure.
01-heat sink production - heat sink manufacturing - heat sink compound
Previous Heat Sink Manufacturing Methods:
1. Extrusion
2. Machining
3. Stampings
4. Castings
Types of LED Heat Sink produced:
Plated Fin
Pin Fin
Radial Fin
Speciality Heat Sink
Benefits of Liquid forged Heat sinks: 
1. Improved thermal performance
Rapid heat transfer delivers more lumens/ watt and enhances the LED lifespan.
• Aluminium wrought alloys conduct heat faster than cast alloys used in die casting.  Also by incorporating a copper base, the heat sink achieves 4 times better thermal conductivity.
• Intricate fins and pins deliver a higher aspect ratio, increasing the surface area for ambient heat transfer. With no centre core, heat removal by convection is also improved.
• Porous-free microstructure eliminates air pockets for rapid, continuous heat transfer through the heat sink to the surroundings.
2. Flexible Design
The key to an effective LED heat sink design is to be able to balance both maximisation of heat sink surface area and form factor constraint of light fixtures. Each custom LED lighting design involves the concept of efficiently transferring as much heat as possible away from the LED chip. With a high aspect ratio and the ability to create 3D designs as a single piece, liquid forging is a highly scalable manufacturing process, allowing the creation of intricate heat sinks made of composite materials such as copper and aluminium in a single step.  The fins of the heat sink can be combined with a copper base to create a radial heat sink with improved design and better thermal conductivity.  The process allows heat sinks and light fixtures to be formed as a single piece, minimising assembly costs, and improving thermal efficiency.
3. Enhanced finishing
The heat sink can be anodised for a better finishing, which further improves thermal performance by an additional 10 – 15%.
Features of LED heat sink by Liquid metal Forging:
1. High aspect ratio
2. Enhanced Heat Dissipation
3. Flexible Design
4. One step manufacturing with light fixture
5. Minimum Porosity
6. Anodised Finishing
7. Enhanced Aluminium alloy conductivity
(i) Elimination of micro porosity (shrinkage and porosity), due to the effect of solidification under pressure.
(ii) Improvement in product surface finishing due to high direct pressure into mould surface.
(iii) Production using Aluminium series materials
(iv) Multi cavity possible
(v) Near net shape process
(vi) High aspect ratio features
(i)  Variation in z‐axis thickness control
(ii) Mechanical structure (elongation)


Post a Comment